| A | Clean-Cuts™ Hose Blade... is break-through technology using a tooth blade, cutting with backs of each tooth, so the blade does not take a kerf. The mechanical knife of these teeth is very aggressive when it comes to severing steel braiding on hydraulic hoses. The Clean-Cuts™ Hose Blade outlasts conventional scalloped edge blades two times, is resharpenable several times, and is attractively priced.
|
| B1 | Feeder... This top feeder is designed for quick cutting of lighter hoses up through 1-1/4" x 6 wire.
|
| B2 | Feeder... This (second) bottom feeder attachment is break-through technology utilizing a simple screw feeder for cutting up to 2" x 6 wire hose. The secret to cutting heavier hose is to be able to bend it efficiently without a lot of effort. The B2 feeder is effortlessly operated when cutting heavy hose.
|
| C | Rugged Welded Design... The Clean-Cuts™ Hose Saws combine simplicity with rugged construction to create a hose saw with outstanding speed and squareness of cut. The Clean-Cuts™ design also insures clean cuts, safe operation, and no smoke.
|
| D | Direct Shaft Drive... The blade is directly driven by the saw motor converting 100% of the horse power to the Clean-Cuts™ Hose Blade. A 40 mm spindle with drive pin hole and left hand threaded bolt insures a "non-blade-slip" drive.
|
| E | Retracting Blade Guard... The plate steel retracting saw blade guard insures the safety of operation. The blade is fully enclosed, even during cutting process. The guard contours around each hose while it is being cut.
|
| F | Vacuum Port In Saw Guard.. The Clean-Cuts™ Series Saw Guard has a unique 2" OD vacuum port which connects to a standard 5 HP shop vac. This guard vacuum's out smoke and debris as the hose is being cut. Please see video demonstration at: Video -- Windows Media || Video -- QuickTime
|
| G | Moveable Pins.... The pins need to be repositioned according to the hose sizes being cut. Proper pin locations provide considerably faster cutting times as well as reduced blade pinching which reduces heat and smoke.
|
| H | Double Pole On/Off Switch... The on/off switch on the Clean-Cuts Series Saws are wired to accept a 110v ac vacuum operated simultaneously to the saw motor. This features insures clean smoke free cuts.
|
Features & Benefits
